How to use the device.

1. this enema machine in the operation of the air, so before starting the air compressor will be opened, the air pressure should be adjusted at about 6 kg, (0.6MPa) open the bleeder valve, turn on the power, and then open the machine power switch, at this time, the machine will display the standby screen, press the boot button, the screen switches, touch the screen, and turn on the power of the motor.

2. the choice of working mode, there are three working mode can be switched at this time - through the way manual way automatic way

(1) through the way: in the case of selecting through the way, you must press the screen below the through the confirmation, turn on the vacuum pump, open the filling switch can be, the knee touch the knee touch switch will be discharged, release the material will not be discharged, this way is suitable for filling rectum.

(2) manual mode: in the filling, manual mode can be quantitative how much material, in the manual mode to confirm, press the quantitative setting, this time according to the requirements of how much material to set. Turn on the vacuum pump and filling switch, touch the knee switch will be out of a material. Manual mode can be connected with the twisting device to complete the twisting process, when connected with the twisting device, you should first connect the twisting system, the enema production line full set of equipment to install the appropriate filling tube, select the twisting link and then twisting to confirm that the servo motor to start, select the number of laps of the twisting, adjust the rotational speed of the servomotor, turn on the vacuum pump and the filling signals, at this time, touch the knee switch, the machine will be continuously twisted, and then touch the switch Then it will stop.

(3) automatic mode: automatic mode and punch card machine connected to the mutual control of filling signals, in the automatic mode to confirm, select the number of grams to be filled, this time to choose the appropriate filling tube and punch card machine connected to the start of the vacuum pump and filling signals, at this time from the punch card machine to transmit the signals, the sausage machine will be completed once the feeding.